The bicycle chains are an extremely effective drive that achieve high performance . When a cyclist pedals, almost 100 percent of the pedaling power is transferred to the rear wheel. Due to high environmental influences such as rain and heat, the chains are exposed to high loads due to the resulting corrosion, dirt from mud, sand, dust and road dirt. If the chain is not maintained regularly, stubborn layers of dirt can deposit and reduce the quality. Without care, increased friction occurs and the bicycle chain and drive wear out in a very short time until they are unusable. Regular cleaning and subsequent lubrication with our premium products counteract wear and extend the service life of a bicycle chain immensely.
Our master recommends oiling the bicycle chain at least twice a year, depending on how often and how long you ride your bike. When the bike season starts in the spring, use the bike with our KR400 chain cleaner for the best possible preparation and cleaning of the bike chain. After
Be sure to use our KL500 chain oil for cleaning to optimally oil the bicycle chain. The contained graphite in the oil nestles in every moving chain link and the driving is flawless. Furthermore, we recommend cleaning and oiling the chain again in summer, because dust, pollen and resin deposits make cleaning and care recommended for a long-lasting chain.
We recommend cleaning the bicycle chain every 1 to 2 months. But if you ride your bike, mountain bike or e-bike very often
is on the go, it makes sense to clean the chain more often.
Cleaning the bicycle chain with the original Syprin chain cleaner is easy, quick and effective. Simple: shake briefly and spray the entire chain. Fast and effective: spray on, rinse off, done.
The bicycle chains are mainly exposed to lateral stresses as a result of the shifting processes. If the necessary lubrication is missing, the chain can run dry and the increased friction leads to premature wear. Too much low-quality oil, on the other hand, can attract road dirt, dust, and grit. This mix of dirt and oil acts like sandpaper and also leads to heavy wear on the chain and sprockets. This is not the case with our Premium KL500 chain oil , as our chain oil works with graphite and covers the chain links like a protective film.
We therefore recommend thoroughly lubricating the chain with our KR400 cleaning spray to be cleaned and then left to dry. While the chain runs over the smallest sprocket, apply the oil to the joint gap on the rollers. Shake the KL500 chain oil vigorously and apply thinly, then empty it 3-4 times.
Optimum care is achieved through economical dosing and repetition of the care process.
Original Syprin KL500 chain oil is a German branded product of the best quality for your bicycle chain. Safety and reliability are essential for long bike rides.
Which bicycle chain oil you use is up to you, but our chain oil is rated very well and is used by thousands
Recommended to enthusiastic bike fans.
It is essential to clean the bicycle chain because the dirt attacks the material. The wear is higher due to the dirt - not only on the chain itself, but also on the sprockets of the chainrings. For this reason, it makes sense to spend time cleaning the bicycle chain and it's more fun afterwards
Riding a bike, e-bike or e-scooter.
Before applying the chain oil, we recommend cleaning the chain well with original Syprin chain cleaner . The chain oil works best when the chain has no residue and is free of dirt and after regular cleaning of the chain, it is advisable to measure the wear regularly, because an overstretched chain can break. After the chain has been cleaned, it is now possible to put a drop of chain oil on each link of the chain. To reach each limb, rotate the pedals backwards. In order for something to get through, it is good if the chain is turned slightly. Then remove the excess oil with a cloth.
The magic word is dish soap. Moisten the relevant garment well. As with washing your hands, you can start by using dish soap to remove bike grease from clothing . drip something
Target the stain with dish soap, rub it in until the stain dissolves, and then wash the garment in the washing machine as usual.
We recommend the chain oil because
applying chain wax is tedious. The chain oil, on the other hand, protects against corrosion and does not wash out quickly. However, it should be noted that the drive should be thoroughly cleaned and re-lubricated in bad weather.
