For many people, a car is not just a vehicle to get them from A to B, it is even a kind of status symbol. You always want your car neat and clean looks. Surely you could now drive the car to the car wash or wash it by hand. In this case, the in the car wash Rims have never been properly cleaned .

And at that hand wash they are often forgotten or overlooked because one thinks it would be too much work to remove the dirt, which becomes quite stubborn.

It is very easy to fit your rims yourself with one rim cleaner to clean without this having to become a major effort. The wheel rim cleaner creates a fast and efficient cleaning of the rims achieved and your own car gives a nice overall picture again.

Why are my aluminum rims heavily soiled?

Aluminum rims are often very dirty because the brake dust is deposited here. Usually the front rims are more affected than the rear rims. The reason for this is very simple.

At the brakes creates heat, causing the brake dust really burned in. A visit to the car wash cannot remove this dirt, but you have to clean the rims by hand if you really want them to be nice and clean again.

What is required to clean heavily soiled aluminum rims?

Best suited to Cleaning rims is a Rim Cleaner . You should make sure that you do not use an acidic cleaner, as this could damage the screws. A good rim cleaner should ph neural be.

Clean heavily soiled aluminum rims - in steps

Step 1

First of all, it is very important that the rims have cooled down. Otherwise the cleaner will stick and lose its effectiveness.

step 2

Spray the rim all over with the cleaner, choosing the front side first. Now it is sprayed into the rim, more precisely into the rim well. You should be careful not to spray the brakes, as they could get stuck.

step 3

The rim cleaner starts to react with the dirt. You have to leave the cleaner on for 5 to 10 minutes. Red dirt often appears on the wheels because the cleaning complex reacts with the rim. But that does not have to be the case with every rim cleaner.

step 4

It is recommended to spray the rims one after the other. When you get back to the first rim, you can start with the actual cleaning.

step 5

The rim is sprayed with water to wash off the dirt. Stubborn areas must be reworked by hand and a cloth. Then the rim is rinsed off again. The cloth or sponge that you have used must be rinsed out again and again so that new dirt is not spread on the rims again.

step 6

The rim is repolished.

Conclusion

Anyone is able to Clean and maintain car . A well-maintained car not only looks better, but you can also increase the longevity of a vehicle with the appropriate care.

Straight rims seems to pose a problem for many people. Because these are often extremely dirty and at first glance it seems as if it is difficult to be able to get this dirt down again.

With the right rim cleaner but this is not a problem. You can use it quickly and easily, and in a very short time you get beautiful rims that are worth seeing.